Instrumentation for every stage of the treatment train — from inlet screening through aeration control to final effluent compliance. Parameter selection, measuring points and recommended instrument sets.
| Process Stage | Parameter | Purpose | Recommended Instrument |
|---|---|---|---|
| Inlet / Screening | pH, conductivity | Detect abnormal industrial discharge before it reaches biology | CPS11D, CLS50D |
| Primary Clarification | Suspended solids, turbidity | Monitor sludge blanket and carry-over | CUS51D, SOLITAX sc |
| Aeration Basin | Dissolved oxygen, pH, MLSS | Blower energy optimisation and nitrification control | COS61D, FDO 925 |
| Anoxic Zone | Nitrate, ORP | Denitrification endpoint control | Nitratax sc, CPS12D |
| Secondary Clarifier | Sludge level, turbidity | Prevent sludge wash-out | CUS71D |
| Disinfection | Free chlorine, UV intensity | Dose control and pathogen inactivation | CCS51D, CL17 |
| Final Effluent | COD, ammonium, pH, turbidity | Discharge permit compliance and reporting | CA80COD, TU5300 sc |
Optical DO sensor, pH sensor and multi-channel transmitter for blower energy savings of 15–30%.
Online COD, ammonium and turbidity with data logging for permit reporting.
Nitrate, ORP and DO across aerobic and anoxic zones for biological nutrient removal.
| Optical or electrochemical DO? | Optical sensors need no electrolyte replacement and hold calibration longer in aeration basins, which lowers maintenance cost despite a higher purchase price. |
| How often do pH sensors need calibration? | Typically weekly to monthly depending on fouling. Digital sensors such as Memosens allow laboratory calibration and fast on-site exchange. |
| Can you match our existing PLC? | Yes. Transmitters are available with 4–20 mA, HART, PROFIBUS, Modbus and Ethernet/IP outputs. |
Send us your process description and we will propose an instrument set with order codes and lead times.
Talk to an Engineer